Follow us :

How does water jet cutting machine

time2011/05/12

How does water jet cutting machine

Water jet cutting machines use high pressure water jet is very high, to get through the glass materials such as wood, metal, stone and not tempered. Water jet cutting methods provide a wide range of interests than the traditional. The materials they can use, too delicate, or rotating blades cut and puzzles. All of the water jet cutting machine is done by computer, using CAD software assistance. This makes the operation safer and easier than alternative blade or heat-based.

Teach you how to do:
1, the water tank to the fill line marked on the fuel tank. If you are using abrasive water jet cutting machine, you may wish to join before the water-filled tank with your abrasive. Cutting machine with a fine grinding wheel, sand sand, to increase the water jet cutting ability and efficiency.
2, connecting the main water pump pressure. Older models may need to water jet wrench open the main valve, and the new model tends to have a click locking mechanism. Once connected to the main pumps, water pipes attached to the jet pump hose.
3, the abrasive nozzle connected to the waterline. Many newer models built into the injector line, but older models may need to insert into the water line near the bottom of the nozzle specified port.
4, start the software, you will use to control the aircraft. Cut open an existing schematic, or create a new cutting model of the current project. Save, and then send commands to the water jet of any changes.

waterjet cutting machine