87,000Psi Dual Intensifier Pump will soon go into production
time2011/01/17
Having regard to High-end cutting market needs,BOAO company is preparing to produce 87,000Psi Dual HyperJet Intensifier Pump,the flow of the original model has been doubled and the cutting speed will be a corresponding elevation. This is a joyous news to those users who need to cut thick plate.
Under the pressure of 600Mpa,the diameter of orifice can only be 0.011"(0.28mm) with the original 45KW(87,000Psi) Pump,however,if using Dual Intensifier,the diameter of orifice 0.014"(0.35mm) and 0.015"(0.38mm) can be used.
Under the pressure of 600Mpa,the diameter of orifice can only be 0.011"(0.28mm) with the original 45KW(87,000Psi) Pump,however,if using Dual Intensifier,the diameter of orifice 0.014"(0.35mm) and 0.015"(0.38mm) can be used.